Vehicle Recharging Column

Structure in thermosetting material in any color and top with LED illumination.

(dimensions: 300x1200x290mm).

Version with  electronic key reader and delivery by hour or effective consumption

European rules references relating to electric vehicle charging

With reference to the European standard IEC / EN 61851-1 (charging stations for electric vehicles) and IEC / EN 62196-1 and 2 (connectors for charging electric vehicles), the columns produced by GIGIEFFE use the charging method “mode 3” which consists of connect the electric vehicle to the AC power supply through dedicated "type 2" connectors with additional contacts and the use of control systems for:

  • verification of the continuity of the protective conductor between the vehicle and the network.
  • Communication between the charging station and the vehicle via the PWM circuit for load management over 16A. If there is no PWM, the circuit works in a simplified way by checking the continuity of the protective conductor and limiting the load to 16A.
  • Identification of the cable size (resistor coding) and subsequent check, through the PWM circuit, that the charging current is not higher than the maximum that can be drawn.

AVAILABLE IN THE FOLLOWING VERSIONS

EQUIPMENT AVAILABLE ON REQUEST

PERSONALIZED ON CUSTOMER'S REQUEST

COLORS: RAL AVAILABLE ON REQUEST

marchioCE

logoweb.png

GIGIEFFE S.R.L. Via Dell'Artigianato, 2/4 48022 LUGO (RA)
Italy

Tel. +39.0545.32900
+39.0545.25413
E-Mail .  PEC .  P. IVA 02554700399

Search

GIGIEFFE S.r.l.
+39.0545.32900
+39.0545.25413
48022 Lugo (RA)
ITALY